SCSI Adapters
(For Internal and Front
Access Drives)
PCI 1-channel Ultra2 SCSI adapter (LVD)
3X-KZPCA-AA
PCI 2-channel multi-mode Ultra3 LVD SCSI adapter, VHDCI (Tru64 UNIX V5.1 or higher and
OpenVMS V7.2-2 or higher) No shared bus support with OpenVMS. No shared tape/library
support with OpenVMS or Tru64 UNIX. 3X-KZPEA-DB adapter supports shared bus using hard
disk drives under Tru64 UNIX V5.1A with PK4 and NHD5 or V5.1B and TruCluster V5.1B with
Initial Patch Kit installed; supports maximum of two nodes per shared bus; requires 3X-BN55A-
01 Y-cable and connector plug assembly, and 3X-H32CT-AA external LVD terminator per
shared bus.
3X-KZPEA-DB
NOTE: Tru64 UNIX Initial Patch Kit for V5.1B located at:
http://ftp1.support.compaq.com/public/unix/5.1b
NOTE: Patch kit required, kit available at:
http://ftp1.support.compaq.com/public/Digital_UNIX/v5.1/
PCI combo card - PCI 2-channel UltraSCSI single-ended adapter and 10/100 Mbit
KZPCM-DA
PCI combo card - 1-channel Ultra2 SCSI (LVD) Graphics, 10/100 Ethernet
(Tru64 UNIX and OpenVMS only)
3X-DEPVZ-AA
PCI 1-channel UltraSCSI RAID controller (Tru64 UNIX and OpenVMS only)
KZPAC-AA
NOTE: Internal or Front Access Disk Drives connected to a KZPAC controller are not capable of
implementing the fault management features of this controller, such as 'hot spare' and 'automatic
rebuilds'- manual rebuilds are supported.
PCI 3-port UltraSCSI RAID controller (4-MB/8-MB cache) (Tru64 UNIX V4.0F, OpenVMS V7.2-1)
KZPAC-CA/CB
NOTE: Internal or Front Access Disk Drives connected to a KZPAC controller are not capable of
implementing the fault management features of this controller, such as 'hot spare' and 'automatic
rebuilds' - manual rebuilds are supported.
PCI 1-channel Ultra2 SCSI RAID controller, 4-MB cache (Linux-Ready Systems only)
SN-KZPBC-AA
PCI 3-channel Ultra2 SCSI RAID controller, 32-MB cache (Linux-Ready Systems only)
FR-PCTAR-IB
PCI 3-channel Ultra2 SCSI RAID controller, 64-MB cache (Linux-Ready Systems only)
FR-PCTAR-IC
DS10 SCSI cable kit (with connections for three internal drives)
3X-BN51A-SE
NOTE: The DS10 SCSI cable kit is included with the Front Access Storage Cage. The DS10 SCSI
cable kit is required for Internal Storage Cage systems with SCSI disks or tapes.
Desktop Power Cords
North America, 2.5-meter
3X-BN46K-2E
North America, 200 to 240V, 75-inch
BN18J-1K
Australia, New Zealand, 2.5-meter (103541-011)
BN19H-2E
Central Europe, 2.5-meter
BN19C-2E
Denmark, 2.5-meter (103541-481)
BN19K-2E
Egypt, India, South Africa, 2.5-meter (103541-AR1)
BN19S-2E
Israel, 2.5-meter
BN18L-2E
Italy, 2.5-meter
BN19M-2E
Japan, 2.5-meter, Dentori approved
3X-BN46G-02
Switzerland, 2.5-meter (103541-511)
BN19E-2E
UK, Ireland, 2.5-meter
BN19A-2E
Rackmount (M-Series
Cabinet) Power Cords
U.S./Canada
BN20Z-4E
Non-U.S.
3X-BN46L-4E
Japan, 4.5-meter (right-angle connector)
3X-BN46D-4E
QuickSpecs
Compaq AlphaServer DS10
Compaq AlphaStation DS10
Systems
DA - 10908 North America — Version 29 — April 27, 2004
Page 11
