2-14
www.hp.com
Hardware Reference Guide
Hardware Upgrades
9. Repeat steps 7 and 8 for any additional modules that you want to
install.
10. Return the Easy Access drive bay to the down position. Be sure
not to pinch the cables in the chassis when lowering the Easy
Access drive bay.
11. Replace the front bezel and computer access panel.
12. If you normally lock the Smart Cover Lock, use Computer Setup
to relock the lock and enable the Smart Cover Sensor.
The computer automatically recognizes the additional memory the
next time you power on the computer.
Installing an Expansion Card
The computer has three PCI expansion slots and one AGP expansion
slot. Each slot can accommodate an expansion card up to 6.875 inches
(17.46 cm) in length. To install an expansion card:
1. If you have locked the Smart Cover Lock, use Computer Setup to
unlock the lock.
2. Turn off the computer properly through the operating system,
then turn off any external devices.
3. Disconnect the power cord from the power outlet and disconnect
any external devices.
4. Remove the computer access panel.
5. Identify the slot into which you want to insert the expansion card.
Summary of Contents for Compaq d330 ST
Page 46: ...2 36 www hp com Hardware Reference Guide Hardware Upgrades ...
Page 56: ...D 2 www hp com Hardware Reference Guide Security Lock Provisions I Installing a Padlock ...
Page 66: ...E 10 www hp com Hardware Reference Guide Port Security Bracket ...
Page 72: ...G 4 www hp com Hardware Reference Guide Routine Computer Care and Shipping Preparation ...