Hardware Reference Guide
www.hp.com
2-17
Hardware Upgrades
10. If you are removing an AGP card from an AGP expansion socket
with a retention mechanism, pull the retention arm away from the
socket then carefully rock the card back and forth until the
connectors pull free from the socket. Lift the expansion card
straight up then pull it in toward the center of the chassis to
maneuver it around the chassis frame. Be sure not to scrape the
card against other components.
Removing an AGP Card from a Socket with a Retention Mechanism
11. If you are not replacing the old expansion card with a new
expansion card, install an expansion slot cover to close the open
slot. Insert the metal slot cover in the open slot, then push the
expansion slot latch down to secure the slot cover in place.
Ä
CAUTION:
After removing an expansion card, you must replace it with a
new card or cover the open slot (for example, with a metal slot cover or a
piece of duct tape) for proper cooling of internal components during
operation.)
Summary of Contents for Compaq d330 ST
Page 46: ...2 36 www hp com Hardware Reference Guide Hardware Upgrades ...
Page 56: ...D 2 www hp com Hardware Reference Guide Security Lock Provisions I Installing a Padlock ...
Page 66: ...E 10 www hp com Hardware Reference Guide Port Security Bracket ...
Page 72: ...G 4 www hp com Hardware Reference Guide Routine Computer Care and Shipping Preparation ...