Computer Setup (F10) Utility Guide
www.hp.com
7
Computer Setup (F10) Utility
Standard
CMOS
Features
(continued)
SATA Ch 0 Master
SATA Ch 1 Master
For each, allows you to:
• detect HDD size and head on selected
channel
• set extended drive on selected channel
to:
• None
• Auto
• set access mode on selected channel to:
• Large
• Auto
• view:
• Firmware Version
• Capacity
• Cylinder
• Head
• Precomp
• Landing Zone
• Sector
• run SMART HDD status check and
self-test for selected channel:
• SMART Status Check
– Target Disk
– SMART
– SMART Status Check
• SMART Short Self-Test
– Target Disk
– Estimated Test Time
– Start Test
• SMART Extended Self-Test
– Target Disk
– Estimated Test Time
– Start Test
Floppy Controller
Disables/enables the floppy disk controller.
Computer Setup
(Continued)
Heading
Option
Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.