HP Compaq dx2100 Utility Manual Download

Page: 14 / 22

Computer Setup (F10) Utility Guide

www.hp.com

Computer Setup (F10) Utility

Advanced

BIOS Features

(continued)

Hard Disk Boot Priority

Allows you to specify the order of attached

hard drive devices (such as USB HDD

storage, USB2 Drive Key, or USB flash

media). The first drive in the order has

priority in the boot sequence and is

recognized as drive C (if any devices are

attached).

Optical Drive Boot Priority

Allows you to specify the order in which

attached optical drives (including USB ODD)

are checked for a bootable operating system

image.

Network Boot Priority

Allows you to specify the order in which

network devices (including UP NIC cards)

are checked for a bootable operating system

image.

F9 Boot Menu Display

Disables/enables Boot Menu.

Quick Power On Self Test

Disables/enables the system to skip certain

tests while booting.
Enabling this feature decreases the time

required to boot the system.

First Boot Device
Second Boot Device
Third Boot Device

Allows you to specify which devices will boot

first, second, and third, or to disable any of

the three:

• Removable
• Hard Disk
• Optical Drive
• Network
• Disabled

✎

MS-DOS drive lettering assignments

may not apply after a non-MS-DOS

operating system has started.

Computer Setup

(Continued)

Heading

Option

Description

✎

Support for specific Computer Setup options may vary depending on the hardware

configuration.

Summary of Contents for Compaq dx2100























Search results

Summary of Contents for Compaq dx2100

Reviews:

Related manuals for Compaq dx2100

Brands by name

Popular brands

HP Compaq dx2100, Utility Manual

Search results

Summary of Contents for Compaq dx2100

Reviews:

Related manuals for Compaq dx2100

Brands by name

Popular brands