Hardware Reference Guide www.hp.com/in 2-9
Hardware Upgrades
Replacing or Upgrading a Drive
The computer supports up to six drives that may be installed in
various configurations.
This section describes the procedure for replacing or upgrading
the storage drives. A Torx screwdriver is needed to remove and
install the guide screws and retainer screws on a drive.
CAUTION:
Make sure you back up your personal files on the hard drive to an
external storage device, such as a CD, before removing the hard drive. Failure to do
so will result in data loss. After replacing the primary hard drive, you will need to run
the
Restore Plus!
DVD to load the HP factory-installed files.