Hardware Reference Guide www.hp.com/in 2-23
Hardware Upgrades
5.
If replacing or adding a new expansion card, hold the card just
above the expansion slot on the system board then move the card
toward the rear of the chassis so that the bottom of the
bracket on the card slides into the small slot on the chassis.
Gently press the card straight down into the expansion slot on
the system board .
Replacing or Adding an Expansion Card
6.
While holding the expansion card bracket against the chassis,
slide the slot cover lock down toward the expansion card bracket
to secure it in place and replace the screw that secures the slot
cover lock.
7.
Connect the external cables to the installed card, if needed.
Connect internal cables to the system board, if needed.
8.
Replace the computer access panel and reconnect the power
cable.
When installing an expansion card, press firmly on the card so that
the whole connector seats properly in the expansion card slot.
1
2
Photos depicted may vary as per actual machine