Computer Setup (F10) Utility
Computer Setup (F10) Utility Guide
www.hp.com/in 7-1
Computer Setup (F10) Utilities
n
n
n
n
n
n
n
n
n
n
n
Use Computer Setup (F10) Utility to do the following;
Change factory default settings.
Set the system date and time.
Set,view,change,or verify the system configuration,including
settings for processor, graphics, memory, audio, storage,
communications,and input devices.
Modify the boot order of bootable devices such as hard drives,
optical drives,orUSB flash media devices.
Enable or disable Quick Power-On Self Test,which is faster than a
full boot but does not run all of the diagnostic tests run during a
full boot.
Enter the Asset Tag or property identification number assigned by
the company to this computer.
Establish a supervisor password that controls access to Computer
Setup (F10) Utility and the settings described in this section.
To secure integrated I/O functionality,including the serial,USB,or
parallel ports,audio,or embedded NIC,so that they cannot be used
until they are unsecured.
Enable or disble removable media boot ability.
Enable or disable legacy diskette write ability(when supported by
hardware).
7