Computer Setup (F10) Utility Guide
www.hp.com/in 7-3
Computer Setup (F10) Utility
Five action choices are listed on the Computer Setup Utility
screen:
n
Load Default Settings
n
Set Supervisor Password
n
Set User Password
n
Save Setting and Exit
n
Exit Without Saving
Use the arrow keys to select the appropriate heading, then press
Enter
.
Use the arrow (up and down) keys to select the option you
want, then press
Enter
.
To return to the previous screen, press
Esc
.
4. To apply and save changes, press
F10
or select Save &
Exit
Setup
on the Computer Setup Utility screen and press
Enter
.
If you have made changes that you do not want applied, select
Exit Without Saving and press
Enter
.
CAUTION:
Do NOT turn the computer power OFF while the ROM is saving the
F10 Computer Setup changes because the CMOS could become corrupted. It is
safe to turn off the computer only after exiting the F10 Setup screen.