Computer Setup (F10) Utility Guide
www.hp.com/in 7-6
Computer Setup (F10) Utility
Computer Setup
(Continued)
Heading
Option
Description
!
Support for specific Computer Setup options may vary depending on the hardware
configuration
Advanced BIOS
Advanced Chipset
Features
Features
Quick Power On Self Test
Disables/enables the system to skip
certain tests while booting.
Enabling this feature decreases the time
required to boot the system.
Hard Disk Boot Priority
Allows you to specify the order of hard
drive devices. The first drive in the
order has priority in boot sequence and
is recognized as drive C
(if any device attached).
CDROM Boot Priority
Allows you to change the ODD order
First Boot Device
Allows you to specify which devices will
Second Boot Device
boot first, second, and third, or to
Third Boot Device
disable
Boot Other Device
Disables/enables boot other device.
APIC Mode
Disables/enables the APIC mode.
Security Option
Setup
System
F7 (Diagnostic) Support
Allows to Enable / Disable the BIOS
diagnostic tool
F11 Prompt
PEG/onchip VGA controller This allows you to set the first initiation
the monitor display:
•
Onchip VGA
•
PEG Port
•
Auto(default)
On-chip Frame Allow you to ser On-Chip Frame Buffer
size to
Buffer Size
•
1MB
•
8MB
DVMT Mode Allows you to set DVMT Mode to:
•
Fixed
•
DVMT
Allows to Enable/disable the ability to
F11 support ( Recovery option).