Service Reference Guide, dx7300
433611-001
7–9
Removal and Replacement Procedures— Slim Tower (ST) Chassis
7.6 Front Drive Bezels
1. Prepare the computer for disassembly (
Section 7.1
).
2. Remove the computer cover (
Section 7.5
).
3. Remove the drive bezel by pushing the top tab on the right side of the larger front bezel as
shown
1
and rotating the drive bezel away from the larger front bezel
2
.
✎
The drive bezel will vary depending on the computer configuration.
4. Install a bezel or a bezel blank by pushing the bezel into place.