7–34
433611-001
Service Reference Guide, dx7300
Removal and Replacement Procedures— Slim Tower (ST) Chassis
7.13 Front I/O Devices
1. Prepare the computer for disassembly (
Section 7.1
).
2. Remove the computer cover (
Section 7.5
).
3. Remove the two screws that secure the front I/O device to the chassis
1
.
4. Rotate the drive cage to its full upright position.
5. Disconnect the front I/O cable from the system board.
6. Push the front I/O device into the chassis
2
and snake the cable through the tunnel
3
to
remove the device from the chassis.
To reinstall the front I/O device, reverse the removal procedure.