background image

Service Reference Guide, dx7300

433611-001

3–5

Desktop Management

HP Knowledgebase—link to expert information

Automated SoftPaq collection and delivery process for fast resolution of hardware problems

Identify, inventory, and initialize systems with HP ProtectTools embedded security chip

Option for health alerts to display locally on the client system

Report basic inventory information for non-HP clients

For more information on HP Client Manager, visit 

www.hp.com/go/clientmanager

.

3.3.4 HP ProtectTools Security Manager

ProtectTools Security Manager software provides security features that help protect against 
unauthorized access to the computer, networks, and critical data. Enhanced security functionality 
is provided by the following modules:

Smart Card Security for ProtectTools

Embedded Security for ProtectTools

BIOS Configuration for ProtectTools

Credential Manager for ProtectTools

The modules available for your computer may vary depending on your model. For example, 
Embedded Security for ProtectTools requires that the Trusted Platform Module (TPM) 
embedded security chip (some models only) be installed on your computer, and Smart Card 
Security for ProtectTools requires an optional smart card and reader.

ProtectTools modules may be preinstalled, preloaded, or available for purchase from the HP Web 
site. Visit 

http://www.hp.com/products/security

 for more information.

3.3.5 HP Client Premium Suite

HP Client Premium Suite (HP CPS) is designed for organizations wanting full client hardware 
and software lifecycle management from a single, Web-based management console. It combines:

HP Client Manager

HP Systems Insight Manager Connector

HP OpenView Connector

Altiris Client Management Suite - Level 1

Altiris Connector Solution

Altiris Local Recovery Pro

Altiris AuditExpress

For more information on HP Client Management Premium Suite, visit 

http://www.hp.com/go/easydeploy

.

3.3.6 HP Client Foundation Suite

The HP Client Foundation Suite (HP CFS) is designed for organizations wanting essential client 
management functionality. It combines:

HP Client Manager

HP Systems Insight Manager Connector

Summary of Contents for Compaq dx7300











































































































































































































































Reviews: