2-20
Removal and Replacement
Service Manual
Removing the CD/DVD Drive
NOTE:
This section applies only to HP Pavilion 4x00, HP Compaq nx9005 and nx9000,
Compaq Evo Notebook N1050v and N1010v, and Compaq Presario 2100 and 1100 models.
Required Equipment
1 Phillips screwdriver
Removal Procedure
1. Unplug the AC adapter, if present, and then remove the battery.
2. Remove these additional assemblies:
•
Keyboard cover (page 2-13)
•
Keyboard (page 2-16)
3. Remove the 2 screws that secure the CD/DVD drive to the top case and motherboard.
NOTE:
The screws that secure the CD/DVD drive are 2 different sizes. The front screw is a
M2.5×6.0mm screw. The back screw is a M2.5×4.0mm screw. Make sure these screws are
installed in the correct locations when reinstalling the CD/DVD drive.
4. Place your index finger in the top case opening, and then push out on the CD/DVD drive to release
it from the motherboard.
5. Remove the CD/DVD drive.
Figure 2-15. Removing the CD/DVD Drive
HP Pavilion 4x00, HP Compaq nx9005 and nx9000,
Compaq Evo Notebook N1050v and N1010v,
and Compaq Presario 2100 and 1100 Models