Service Manual
Removal and Replacement
2-21
NOTE:
This section applies only to HP Pavilion 5x00, HP Compaq nx9010 and nx9008,
and Compaq Presario 2500 models.
Required Equipment
1 Phillips screwdriver
Removal Procedure
1. Unplug the AC adapter, if present, and then remove the battery.
2. Remove these additional assemblies:
•
Keyboard cover (page 2-13)
•
Keyboard (page 2-16)
3. Remove the two M2.5×6.0mm screws that secure the CD/DVD drive to the top case
and motherboard.
4. Place your index finger in the top case opening and push out on the CD/DVD drive to release
it from the motherboard.
5. Remove the CD/DVD drive.
Figure 2-16. Removing the CD/DVD Drive
HP Pavilion 5x00,
HP Compaq nx9010 and HP nx9008,
and Compaq Presario 2500 Models