Service Manual
Removal and Replacement
2-23
.
Figure 2-17. Removing the Display Assembly
Reassembly Notes
NOTE:
After replacing the display assembly or motherboard, you must use the Service Utilities
floppy disk to reprogram the EEPROM on the motherboard for the new display.
1. Download the notebook series service package from the Partnership Web site (see page vii),
and then create a Service Utilities floppy disk as described in the package’s Readme file.
2. Plug in an AC adapter.
3. Insert the Service Utilities floppy disk in the floppy drive. If the unit has no internal floppy drive,
connect a USB floppy drive.
4. Turn on the notebook.
5. When you see the HP logo, press
esc
to display the boot menu, then boot from the floppy drive.
6. Select the option to update the display/LCD identification stored on the motherboard.
•
Make sure you connect the grounding strap to the left display assembly hinge.
•
When connecting the left and right antenna PCAs, make sure they are parallel with the
display assembly hinges.