MultiBoot
Hardware and Software Guide
8–7
Setting a MultiBoot Express Prompt
To set the notebook to display the MultiBoot startup location
menu each time the notebook is started or restarted:
1. Open Computer Setup by turning on or restarting the
notebook, and then pressing
f10
while the “F10 = ROM Based
Setup” message is displayed in the lower-left corner of the
screen.
❏
To change the language, press
f2
.
❏
For navigation instructions, press
f1
.
2. Use the arrow keys to select the
Advanced
menu >
Boot
Options
,
and then press
enter
.
3. In the Express Boot Popup Delay (Sec) field, select the length
of time in seconds that you want the notebook to display the
startup location menu before it defaults to the current
MultiBoot setting (when 0 is selected, the Express Boot
startup location menu is not displayed.)
4. To save your preferences and exit Computer Setup, use the
arrow keys to select
File > Save Changes and Exit
. Then
follow the instructions on the screen.
Your preferences are in effect when the notebook restarts.
