background image

11–8

Hardware and Software Guide

Software Update and Recovery

System Recovery

The computer system recovery process provides several ways to 
recover optimal system functionality. For best results, attempt to 
recover optimal computer functionality by using the following 
procedures 

in the order described here.

Safeguarding Your Data

Software or devices added to the computer can cause your system 
to become unstable. To safeguard your documents, store personal 
files in the My Documents folder and periodically create a 
backup copy of the My Documents folder.

Altiris Local Recovery

Altiris Local Recovery is a preloaded application that protects the 
files on your computer by storing copies of files, called 

snapshots

. If files on your computer are accidentally deleted or 

corrupted, you can easily restore the files yourself. You can also 
restore your complete file system to a previous state.

Altiris Local Recovery provides protection of files by backing up 
files to a hidden Altiris recovery partition. When you install the 
software, the Recovery Agent Partition Wizard guides you 
through the process of creating the recovery partition. After the 
partition is created, the computer restarts and creates the first 
snapshot. After the snapshot is created, the computer restarts, 
making the snapshot available for recovery through Windows.

By default, Local Recovery automatically takes snapshots of your 
files on a regular basis. You can change the snapshot schedule. 
For more information, refer to the Altiris Local Recovery Help.

Summary of Contents for Compaq NC6110























































































































































































































































Reviews: