manualshive.com logo in svg

HP Compaq NC6110, Hardware And Software Manual

The HP Compaq NC6110 is a reliable and efficient laptop designed for the modern user. To ensure its longevity, it is essential to follow the guidelines provided in the Maintenance and Service Manual. This comprehensive manual can be downloaded for free from 88.208.23.73:8080, providing you with valuable instructions to keep your laptop running smoothly.

Share
Download
background image

2–28

Hardware and Software Guide

Power

Resolving Low-Battery Conditions

Ä

CAUTION: 

To reduce the risk of data loss when the notebook reaches 

a critical low-battery condition and has initiated hibernation, do not 
restore power until the power/standby lights are turned off.

When External Power Is Available

To resolve a low-battery condition when external power is 
available, do one of the following:

■

Connect the AC adapter

■

Optional power adapter

When a Charged Battery Pack Is Available

To resolve a low-battery condition when a charged battery pack is 
available:

1. Turn off the notebook or initiate hibernation. 

2. Insert a charged battery pack. 

3. Turn on the notebook.

When No Power Source Is Available

To resolve a low-battery condition when no power source is 
available:

■

Initiate hibernation 

– or –

■

Save your work and shut down the notebook.

When the Notebook Cannot Restore from 
Hibernation

To resolve a low-battery condition when the notebook lacks the 
power to restore from hibernation:

1. Insert a charged battery pack or connect external power.

2. Exit hibernation by pressing the power/standby button.

Summary of Contents for Compaq NC6110























































































































































































































































Reviews:

No comments

Related manuals for Compaq NC6110

Samsung NP-Q1 User Manual (Vista) Información Importante preview
NP-Q1 User Manual (Vista)
Brand: Samsung Pages: 212
Panasonic Toughbook CF-74CCB02BM Operating Instructions Manual preview
Toughbook CF-74CCB02BM
Brand: Panasonic Pages: 36
Panasonic Toughbook CF-52EKMBGAM Operating Instructions Manual preview
Toughbook CF-52EKMBGAM
Brand: Panasonic Pages: 22
Panasonic Toughbook CF-Y5LWEZZBM Operating Instructions Manual preview
Toughbook CF-Y5LWEZZBM
Brand: Panasonic Pages: 36
Oregon Scientific B-Book Learning Laptop Instruction preview
B-Book Learning Laptop
Brand: Oregon Scientific Pages: 28
Predator TRITON 500 User Manual preview
TRITON 500
Brand: Predator Pages: 101
Acer TravelMate 660 series Manual Do Utilizador preview
TravelMate 660 series
Brand: Acer Pages: 98
Acer TravelMate 650 Series Manual Do Utilizador preview
TravelMate 650 Series
Brand: Acer Pages: 98
Medion AKOYA Instruction Manual preview
AKOYA
Brand: Medion Pages: 88
Dell G7 7590 Setup And Specifications preview
G7 7590
Brand: Dell Pages: 23
Dell G7 7790 Setup And Specifications preview
G7 7790
Brand: Dell Pages: 22
HP Compaq Mini Series Getting Started Manual preview
Compaq Mini Series
Brand: HP Pages: 52
HP Compaq CQ45 Product End-Of-Life Disassembly Instructions preview
Compaq CQ45
Brand: HP Pages: 3
HP Compaq Mini 110 Specifications preview
Compaq Mini 110
Brand: HP Pages: 6
HP Compaq mx9030 Maintenance And Service Manual preview
Compaq mx9030
Brand: HP Pages: 15
HP Compaq NC4400 Getting Started Manual preview
Compaq NC4400
Brand: HP Pages: 67
HP Compaq Mini CQ10-410SF Getting Starded Manual preview
Compaq Mini CQ10-410SF
Brand: HP Pages: 52
HP Compaq Mini 210 Getting Started preview
Compaq Mini 210
Brand: HP Pages: 67

Brands by name

Popular brands

Load more brands