Product Description
Maintenance and Service Guide
1–5
1.2 Resetting the Computer
If the computer you are servicing has an unknown password,
follow these steps to clear the password. These steps also
clear CMOS:
1. Prepare the computer for disassembly (refer to
Section 6.3,
“Preparing the Computer for Disassembly,”
for more
information).
2. Remove the real-time clock (RTC) battery (refer to
Section 6.11, “RTC Battery,”
for more information on
removing and replacing the RTC battery).
3. Wait approximately 5 minutes.
4. Replace the RTC battery and reassemble the computer.
5. Connect AC power to the computer. Do not reinsert any
battery packs at this time.
6. Turn on the computer.
All passwords and all CMOS settings have been cleared.
1.3 Power Management
The computer comes with power management features that
extend battery operating time and conserve power. The
computer supports the following power management features:
■
Standby
■
Hibernation
■
Setting customization by the user
■
Hotkeys for setting the level of performance
■
Battery calibration
■
Lid switch standby/resume
■
Power button
■
Advanced Configuration and Power Management (ACPM)
compliance
Summary of Contents for Compaq NC8230
