HP Compaq NC8230 Maintenance And Service Manual Download

Page: 68 / 246

3–14

Maintenance and Service Guide

Software Update and Recovery

Reinstalling Device Drivers and Other
Software

After the operating system installation process is complete, you
must reinstall drivers.

To reinstall drivers, use the

Recovery

disc included with the

computer:

1. While running Windows, insert the

Recovery

disc into the

optical drive.

✎

If your computer does not have an internal optical drive,
connect an optional external optical drive.

2. If you do not have autorun enabled:

a. Select

Start > Run

b. Then type

D:\SWSETUP\APPINSTL\SETUP.EXE

where

indicates the optical drive.

3. Follow the on-screen instructions for installing the drivers.

After the drivers are reinstalled, you must reinstall any software
you added to the computer. Follow the installation instructions
provided with the software.

Summary of Contents for Compaq NC8230























































































































































































































































Search results

Summary of Contents for Compaq NC8230

Reviews:

Related manuals for Compaq NC8230

Brands by name

Popular brands

HP Compaq NC8230, Maintenance And Service Manual

Search results

Summary of Contents for Compaq NC8230

Reviews:

Related manuals for Compaq NC8230

Brands by name

Popular brands