background image

Troubleshooting 

OS CD Reinstall 

If other recovery efforts do not successfully repair the notebook, 

you can reinstall the operating system. 

Å

WARNING: 

Personal data and software you have installed on the 

notebook will be lost during the OS CD reinstall. To protect your data, 
make a backup copy of My Documents before reinstalling your operating 
system. Visit Help and Support to learn more about backing up your files. 

To reinstall the operating system: 

1. Connect the notebook to external power and turn on the

notebook.

2. Immediately insert the OS CD into the notebook. 
3. Press and hold the power button for 5 seconds to turn off the 

notebook. 

4. Press the power button again to start the notebook. 
5. When prompted, press any key to boot from the CD. After a 

few minutes, the Welcome to Setup screen opens. 

6. Press 

enter

 to continue. A Licensing Agreement screen is

displayed.

7. Press 

F8

 to accept the agreement and continue. The Setup

window is displayed.

8. Press 

esc

 to continue installing a fresh copy of the operating 

system without repairing. 

9. Press 

enter

 to set up the operating system. 

10. Press 

C

 to continue setup using this partition. 

Startup Guide 

4–11 

Summary of Contents for Compaq NX9020



















































Reviews: