ENABLE LDAP
NOTE:
If LDAP is enabled, local accounts are disabled, and the LDAP server becomes unavailable,
you can recover by booting into Lost Password mode.
When booting in Lost Password mode, the local Administrator password will be reset, LDAP is
disabled, and Local Logins are re-enabled.
•
Command:
ENABLE LDAP [NOLOCAL]
•
Description:
Enables directory authentication. If you use the
NOLOCAL
option, local users are not enabled.
•
Access level/Bay level:
OA Administrator
•
Restrictions:
To enable LDAP, you must first complete the configuration.
REMOVE LDAP CERTIFICATE
•
Command:
REMOVE LDAP CERTIFICATE "<certificate name>"
•
Description:
Removes the trust certificate corresponding to the MD5 <
certificate name
>.
◦
◦
This command revokes trust in the LDAP server associated with the certificate.
•
Access level/Bay level:
OA Administrator
•
Restrictions:
None
REMOVE LDAP GROUP
•
Command:
REMOVE LDAP GROUP {ALL | "<group name>"}
•
Description:
Removes the LDAP group from the system. If you specify
ALL
, then all LDAP groups are removed
from the system.
•
Access level/Bay level:
OA Administrator
•
Restrictions:
To enable LDAP, you must first complete the configuration.
36
Directory commands
