SET NTP SECONDARY
•
Command:
SET NTP SECONDARY <ip address>>
•
Description:
Sets the secondary server used for synchronizing time and date using the NTP protocol
•
Access level/Bay level:
OA Administrator, OA Operator
•
Restrictions:
You must be connected to the monarch OA.
◦
◦
The <
ip address>
must be in the form ###.###.###.###, where each ### ranges
from 0 to 255.
SHOW COMPLEX INFO
•
Command:
SHOW COMPLEX INFO
•
Description:
Displays the following fields:
◦
Product name
◦
Complex name
◦
Original product number
◦
Current product number
◦
UUID
◦
Manufacturer
◦
Serial number
◦
Complex type
◦
Configured complex firmware version
During the initialization phase, string values can be set to “Unknown”, “[Unknown]”, or
“None”. If this occurs, try the command again after a few minutes.
•
Access level/Bay level:
OA Administrator, OA Operator, OA user
•
Restrictions:
You must be connected to the monarch OA.
•
Example:
oa_hostname> show complex info
Product Name: Superdome2 16s
Complex Name: Complex1
Original Product Number: AH337A
Current Product Number: AH337A
UUID: Unset
Manufacturer: hp
SET NTP SECONDARY
95
