D-6
POST Error Messages
Writer: kmosby Project: Compaq Professional Workstation SP700 Reference Guide Comments: 320280-002
File Name: P-APPD.DOC Last Saved On: 12/11/98 4:31 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
POST Error Messages and Codes
Continued
Error Code
Probable Source
of Problem
Action
1793-Secondary
Controller or Disk Failure
An error has been detected with
the CD-ROM interface.
Run the Diagnostics
utility.
A Critical Error Occurred
Prior to this Power-Up
Critical failure (POST) recorded
into the wellness log.
None.
A Collectable Memory
Error Occurred Prior to
this Power-Up
Single-bit ECC during POST.
None.
This Workstation has
experienced an NMI
(Hardware Error)
As indicated.
None.
Fixed Disk Parameter
Table or BIOS Error
System Halted
Configuration or hardware
failure.
Run the Setup and
Diagnostics utilities.
XX000Y ZZ Parity
Check 2
Parity RAM failure.
Run the Setup and
Diagnostics utilities.
Audible (beep)
Power-on successful.
None.
Invalid Electronic
Serial Number
The electronic serial number is
corrupt.
Run the Setup and
Diagnostics utilities.
(RESUME=
"F1" KEY)
As indicated to continue.
Press the F1 key.