4-1
Compaq Professional Workstation SP700 Reference Guide
Writer: kmosby Project: Compaq Professional Workstation SP700 Reference Guide Comments: 320280-002
File Name: E-CH04.DOC Last Saved On: 12/11/98 4:17 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Chapter 4
Network Communications
This chapter provides information about networks and the hardware connectors
and software device drivers that allow you to access a network. Once your
network connection is active, you can share resources such as a printer,
exchange information from device to device, and run common software
programs.
NOTE
: For more information about installing your network driver, refer to the
Software Installation Guide.
Your workstation comes Ethernet network ready, which means that it has a
preinstalled network controller and preinstalled network drivers. The Compaq
NC3161 Fast Ethernet NIC Embedded 10/100 WOL is a PCI bus mastering,
dual speed 10BaseT, and 100BaseTX controller that will automatically detect
network connection speed and adjust accordingly. The controller supports full
duplex Ethernet, allowing two-way transmission between nodes for up to 20 or
200 Mbits/sec aggregate bandwidth.
NOTE
: Your workstation is also Token Ring Network capable. To connect to a
Token Ring Network, you must install a Token Ring board.