1-2
Product Features
Writer: kmosby Project: Compaq Professional Workstation SP700 Reference Guide Comments: 320280-002
File Name: B-CH01.DOC Last Saved On: 1/18/99 11:38 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Standard Features
The Compaq Professional Workstation SP700 offers the following features.
Features may vary depending on your model. For a complete listing of the
hardware and software installed in your workstation, run the INSPECT utility in
Chapter 2.
Table 1-1
Compaq Professional Workstation SP700 Standard Features
Feature
Compaq Professional Workstation SP700
Processors
Standard with either Pentium II Xeon 400-MHz, Pentium II
Xeon 450-MHz, or Pentium III Xeon 500-MHz processor
Number of Processors
One processor, upgradable to two
L2 Cache Size
512 KB, 1 MB
PCI Bus
Dual-Peer PCI buses (aggregate bandwidth of 267MB/sec)
AGP Bus
2x mode capable (533 MB/sec bandwidth) and supports
Side-Band Addressing (SBA)
Memory Controller
Dual 64-bit memory controllers (aggregate bandwidth of
1.6GB/sec)
Memory
100-MHz ECC Registered SDRAM. All models upgradable to
4 GB.
Optional Memory Upgrades
Supports 100-MHz ECC 32-MB, 64-MB, 128-MB, 256-, or
512-MB Registered SDRAM DIMMs. (Single DIMMs can be
inserted in any of the eight DIMM sockets.)
Error Checking and
Correcting (ECC) Memory
Uses an encoding scheme for memory error detection and
correction. (This feature detects and corrects all single-bit
memory errors, and detects and reports double-bit errors.)
Continued