6-5
Compaq Professional Workstation SP700 Reference Guide
Writer: kmosby Project: Compaq Professional Workstation SP700 Reference Guide Comments: 320280-002
File Name: G-CH06.DOC Last Saved On: 1/22/99 3:20 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Removing the Front Bezel
You will need to remove the front bezel when you are installing or removing
drives in the front bay. To remove the front bezel:
1. Turn off the workstation and disconnect the power cord from the
grounded AC outlet and the back of the workstation.
2. Remove the side access panel.
3. Refer to the following illustration to remove the front bezel.
COMPA
CT
1
2
Figure 6-2. Pressing front bezel release latches and removing front bezel