background image

Firmware, Add-ons, and Printer Installation Guide for Compaq T1000xT1010 Thin Client Products Installation Guide 

 

 

2.  Boot to MS/DOS or exit to MS/DOS Window. 

3.  At the DOS prompt, type: 

C:\(Director)\Xfer (Drive):\(Director)\(Filename.BIN).

 

4. Press 

[

Enter

]. Download Utility will start: Message will display: ”Waiting to download 

data.” 

Proceed to the next section to upgrade T1000/T1010 Firmware. 

T1000/T1010 Firmware Upgrade 

To Set Up the T1000/1010: 

Note:

   Record current terminal settings, if needed. (This process will set all settings to Default.) 

1.  Power OFF the T1000/T1010. (Wait at least 5 seconds before turning on.) 

2.  Power ON the T1000/T1010. 

=

The download will start. 

=

T1000/T1010 reads file into memory and erases flash. 

=

T1000/T1010 reboots. 

3.  Power OFF the T1000/T1010. 

4.  Disconnect the Laplink. 

5.  Reconnect the parallel peripheral. (Optional) 

6.  Power ON the T1000/T1010. 

7.  Configure the T1000/T1010 with settings for your Network. 

IMPORTANT:

   Current products have a “wake-on” LAN feature that may require unplugging 

the power plug, since these units may be in a sleep mode. A complete power cycle is necessary 
for the terminal to see data coming in the port. 

Flash Card Firmware Upgrade 

Prerequisites 

=

Laptop with Windows 98 and PCMCIA Slots 

=

Windows 98 CD (Right click/Install (X:\win98\drivers\storage\ftl\trueffs.inf.) 

=

TFFS (True Flash File System) [Copy Tformat.exe to local drive.] 

=

Firmware files loaded on laptop (*.Bin or *.CPQ) 

To Load Firmware Upgrade on Flash Card: 

From the Laptop: 

1.  Insert the flash card in the PCMCIA slot. (Record the drive letter assigned to flash card, X:) 

2.  Exit to a MS/DOS Window. 

Summary of Contents for Compaq t1010


















Reviews: