LED Indicators for HDDs
Online (bottom)
Drive Failure/ID (top)
LED Indicators on Front
Panel
Heartbeat LED
Fault LED
UID button/LED
LED Indicators on Rear
Panel
I/O Module LED (2) identify/On/Fault; Port (2) Link good/ link fault
UID button/LED
Heartbeat LED
Fault LED
Power On/Standby button/system power LED
Fan LED
Power supply LED
Host Interface
4 x wide SAS 6 Gb/s ports
Maximum Number of
Drives
Up to 12 3.5 inch (D2600) or 25 2.5 inch (D2700) SAS or SATA drives
Up to 25 2.5 inch (2700) Solid State Drives
Temperature Range
Operating
50° to 95° F (10° to 35° C)
Shipping
-40° to 150° F (-40° to 66° C)
NOTE:
Rated 1°C per 1000 feet of elevation to 10,000 ft.
Relative Humidity
Operating
10% to 90%
Non-operating
Up to 95%
Input Power
Requirements
Rated Input Voltage
100 to 240 VAC
Rated Input Frequency
50 to 60 Hz
Rated Input Current
2.68A at115 VAC typical, 4A Maximum
Input Power
(max @
280VAC)
390W (D2600)/340W (D2700)
Heat Dissipation
(maximum)
1331/Btu/hr.1160.Btu/hr
[
NOTE:
standard conversion from Watts to Btu/hr = 3.413 Btu/hr per Watt
]
RAID Support
See Quickspecs for Smart Array Controllers P212, P411, P812, P222 & P421
http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/index.html
P2000 G3 FC Modular Smart Array System
NOTE:
For up to date compatibility, see the following URL for complete Smart Array Controller
compatibility and support information:
http://h18006.www1.hp.com/products/servers/proliantstorage/arraycontrollers/index.html
Upgradeable Firmware
Yes, Offline only. Firmware updates available through hp.com
Disk Drives and Enclosure
Protocol Support
HP 3.5 inch (D2600) or 2.5 inch (D2700) SAS 6 Gb/s
I/O Module
Connector Type
IPass (mini-SAS)
Number of Ports
Two (one IN, other is OUT)
D2600/D2700 Disk
Enclosure
2U Rack Form Factor
Dimensions
(HxWxD)
3.47 x 17.99 x 22.3 in (8.8 x 45.0 x 56.7 cm)
Weight
(base unit)
38 lb (17.2 kg)
QuickSpecs
HP D2000 Disk Enclosures
Technical Specifications
DA - 13404 Worldwide — Version 39 — December 9, 2013
Page 24
