background image

Multiple models for
flexible installation

The HP Remote Monitoring PDUs are available in four form factors for a variety of racks and environments.
All HP Remote Monitoring PDUs can be mounted to stay completely out of the critical rear maintenance
path needed to service IT equipment in the rack. All vertical models use industry standard button and
keyhole mounting for simple drop in installation in HP 11000 G2 and Intelligent Series racks and many
third party racks.

1U PDUs

Mounts in 1U of space in any EIA standard rack. Available in either a low voltage model with twelve NEMA
5-20 receptacles or high voltage models with twelve IEC C13 outlets.

Vertical PDUs

A variety of sizes meet the needs of many environments
Mounts vertically on either side in the rear of the rack using industry standard button and keyhole
mounting.
Standard mounting faces the outlet towards the rear of the rack. This configuration fully prevents
interference in the maintenance zone between rear RETMA rails.
Using the optional configuration of facing the outlets into the rack, multiple PDUs can be mounted
on one side of the rack for higher power density.

*

NOTE:

 Facing the outlets into the rack will interfere with the lower few rack U spaces of the rear

maintenance zone due to breakers on the PDUs.

Vertical PDU Form Factors

Half Height PDU

Designed to fit in 22U and taller racks
Up to 4 Half Height PDUs can be mounted in one side of a 42U or 47U rack using the optional
inward facing configuration.

Mid Height PDUs

Designed to fit in 36U and taller racks
New Three Phase Dual Voltage models provide three NEMA 5-20 convenience outlets for low
voltage equipment in high voltage racks.

Full Height PDUs

Designed for 42U and taller racks.

480V PDUs

Full height form factor for 42U and taller racks
480V three phase 5 wire input provides 277V single phase output.
Unique outlets prevent connection of non-277V compatible equipment.

NOTE:

 When mounted in the standard rear facing configuration only 1 Mid or Full Height PDU can be

mounted per side of the rack. Up to 2 Half Height PDUs can be mounted per side in the standard rear facing
configuration in a 42U or taller rack.

Environmental
monitoring

An optional environmental sensor attaches to the HP Remote Monitoring PDU and can measure air
temperature and humidity in the front or rear of the rack. The environmental senor will send alerts over
the network based on user defined thresholds.

QuickSpecs

HP Remote Monitored Power Distribution Units (mPDU)

Standard Features

DA - 14669   North America — Version 7 — May 9, 2014

Page  4

Summary of Contents for D9N44A














Reviews: