![background image](http://html.mh-extra.com/html/hp/dn650b/dn650b_user-manual_160429026.webp)
Setting Up and Using the Modular Keyboard
User Guide
www.hp.com
3–7
Installing the Modular Access
Keyboard (MAK) Software
To reprogram the access buttons on the modular keyboard and
numeric keypad, install the MAK software:
1. Insert the
I/O and Security Software & Documentation
CD in
the computer’s optical drive.
2. Go to
D:\Modular\MAK\setup.exe
(where D: is the drive
letter of the computer’s optical drive).
3. Double-click the
setup.exe
file.
4. Follow the on-screen instructions to install the software.
Programming the Access Buttons
The access buttons on the modular keyboard and numeric keypad
are pre-programmed to specific destinations, but can be
re-programmed to meet your particular needs.
Before you can program the access buttons, you must install the
MAK software included on the
I/O and Security Software &
Documentation
CD. See
“Installing the Modular Access
To program the access buttons:
1. Double-click the
MAK
icon in the system tray (lower right
corner of the display screen) to launch the MAK software
application.
2. Click the
Help
button on the MAK software interface for
instructions on programming the access buttons.