9.
Lift the memory module compartment cover
(2)
away from the computer.
10.
To remove a memory module:
a.
Pull away the retention clips
(1)
on each side of the memory module . (The memory module
tilts up.)
b.
Grasp the edge of the memory module
(2)
and gently pull the module out of the memory
module slot. (To protect a memory module after removal, place it in an electrostatic-safe
container.)
11.
To insert a memory module:
a.
Align the notched edge
(1)
of the memory module with the tab in the memory module slot.
b.
With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module
(2)
into the memory module slot until it is seated.
62
Chapter 7 Memory Modules
ENWW
Summary of Contents for DV3610EA
Page 1: ...Notebook PC User Guide User Guide ...
Page 6: ...vi ENWW ...
Page 46: ...5 Tighten the hard drive cover screws 3 40 Chapter 4 Drives ENWW ...
Page 73: ......
