Hard drive
NOTE:
All hard drive spare part kits include left and right bracket rails, a connector cable, Mylar cover
with tab, and 4 rubber isolators.
Description
Spare part number
Hard drives for use only with computer models equipped with AMD processors:
320-GB, 5400-rpm
462355-002
250-GB, 5400-rpm
489819-002
160-GB, 5400-rpm
489818-002
120-GB, 5400-rpm
489817-002
Hard drives for use only with computer models equipped with Intel processors:
320-GB, 5400-rpm
462355-001 and
489821-001
250-GB, 5400-rpm
489819-001
160-GB, 7200-rpm
489820-001
160-GB, 5400-rpm
489818-001
120-GB, 5400-rpm
489817-001
Hard Drive Hardware Kit (includes left and right bracket rails, connector cable, Mylar cover with
tab, and 4 rubber isolators)
483862-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 52
).
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the two Phillips PM2.5×6.0 captive screws
(1)
that secure the hard drive bay cover to the
computer.
62
Chapter 4 Removal and replacement procedures
