5
Display Annunciators
Adrs
Power supply is addressed to listen or talk over a remote interface.
Rmt
Power supply is in remote interface mode.
8V
Shows the 8V/20A range is selected. (HP E3633A model)
20V
Shows the 20V/10A range is selected. (HP E3633A model)
25V
Shows the 25V/7A range is selected. (HP E3634A model)
50V
Shows the 50V/4A range is selected. (HP E3634A model)
OVP
The overvoltage protection function is enabled when the
annunciator turns on or the overvoltage protection circuit has
caused the power supply to shutdown when the annunciator blinks.
OCP
The overcurrent protection function is enabled when the
annunciator turns on or the overcurrent protection circuit has
caused the power supply to shutdown when the annunciator blinks.
CAL
The power supply is in calibration mode.
Limit
The display shows the limit values of voltage and current.
ERROR Hardware or remote interface command errors are detected and
the error bit has not been cleared.
OFF
The output of the power supply is disabled (See page 52 for more
information).
Unreg
The output of the power supply is unregulated (output is neither CV
nor CC).
CV
The power supply is in constant voltage mode.
CC
The power supply is in constant current mode.
To review the display annunciators, hold down
key as you turn on
the power supply.
Display
Limit
Summary of Contents for E3633A
