HP eld Manual Download | Manualshive

Page: 259 / 283

background image

TNS/E Native Object Files

eld Manual—527255-009

A-17

Relocation Tables

In linkfiles, relocation table entries always completely describe what needs to be filled

in at the corresponding relocation sites. So, it doesn't matter what is actually in the

operands at the relocation sites. In fact, what is there should be zero, with the

following two exceptions:
The value "-1" is filled in for relocation sites that point from DWARF information at

executable code, when they correspond to unused copies of procedures.
Relocation sites that point from one DWARF section into another, i.e., giving a section

offset rather than an address, are also fixed up in linkfiles created by the linker.
For loadfiles the relocation types whose names begin R_IA_64_REL make use of the

contents of the relocation site, rather than pointing at a target symbol These relocation

table entries say that the contents of the relocation site need to be updated at runtime,

or by the -alf option of the linker, based on how much the segment pointed at by the

relocation site is rebased.
In loadfiles, the relocation sites whose targets were STB_LOCAL would only need to

be updated if the loadfile was rebased.
In loadfiles, the elements of the .rela and .rela.gblzd sections are sorted by target

symbol index. In particular, that means that all the entries with the same target symbol

are consecutive. This includes the case of relocation types whose names begin

R_IA_64_REL, which don't have a target symbol, so that the target symbol index is 0.

r_offset

This tells the location of the relocation site. In a linkfile r_offset is the offset into the

section, as the name implies. In a loadfile r_offset tells the (preferred) virtual address

of the relocation site, so that the name r_offset is a misnomer.
In either case, depending on the relocation type, the relocation site is understood to be

either an operand of an instruction or a data item.
For a relocation site that is a data item, r_offset tells the address of the first byte in that

set of bytes. In other words, since data is big endian, it is the address of the high order

byte of the value. The relocation type tells whether the relocation site contains 4 bytes

or 8 bytes of data.
For a relocation site that is an operand of an instruction, the r_offset fi

eld

identifies

both the bundle and the instruction slot within it. If you zero out the last four bits of

r_offset then the resulting value, which is a multiple of 16, is the address of the bundle.

The value in the last four bits of r_offset must be 0, 1, or 2, to identify the instruction

slot within the bundle.

r_info

The 64-bit r_info fi

eld

combines together two different pieces of information, to tell the

target symbol and the relocation type. The low order 32 bits of the r_info fi

eld

tell the

relocation type and the high order 32 bits tell the symbol. The following #define's

«
...
257
258
259
260
261
...
»

Summary of Contents for eld




























































































































































































































































































Reviews:

No comments

Related manuals for eld

Brand: Davis Instruments Pages: 108

NETWORK AND SECURITY MANAGER 2010.4 - REV1

Brand: Juniper Pages: 244

Brand: Brocade Communications Systems Pages: 60

Brand: Novation Pages: 93

Brand: Brother Pages: 320

Brand: ESET Pages: 38

DSR Series DSR1021

Brand: Avocent Pages: 2

Brand: 10ZiG Technology Limited Pages: 125

Brand: 3Com Pages: 44

Brand: FieldServer Pages: 51

Brand: Darim Pages: 8

ARCHITECTURE 2010

Brand: Autodesk Pages: 4

COLDFUSION 4.5- TO CFML

Brand: MACROMEDIA Pages: 33

Brand: National Instruments Pages: 455

Brand: Oregon Scientific Pages: 8

Energy WeatherLink

Brand: Davis Instruments Pages: 47

TC Chorus-Delay

Brand: TC Electronic Pages: 7

Storage Manager

Brand: NEC Pages: 134

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands