background image

HP Elite 7300/7500, MT

663324-004

page 1 

Illustrated Parts & Service Map

HP Elite 7300/7500 Microtower Business PC

© 2011, 2012 Hewlett-Packard Development Company, L.P. The information 
contained herein is subject to change without notice. HP shall not be liable for 
technical or editorial errors or omissions contained herein. 
Microsoft and Windows are either trademarks or registered trademarks of 
Microsoft Corporation in the United States and/or other countries.

Document Number 663324-004.     4th Edition  November 2012.

Key Specifications 

Spare Parts

Processor Type

Intel® Core™ i7, i5, i3, Pentium, Celeron

RAM Type

PC3-10600 DDR3 (1066/1333 MHz), non-ECC (model 7300)
PC3-12800 DDR3 (1600 MHz), non-ECC (model 7500)

Maximum RAM

16 GB

Expansion Slots

(1) PCIe-x16

(3) PCIe-x1

(1) MiniPCI

Chipset

Intel H67 Express (model 7300)
Intel Z75 Express (model 7500)

Graphics Adapter

Intel HD graphics

Bays

(2) external 5.25-inch

(1) external 3.5-inch

(2) internal 3.5-inch

I/O Interfaces

Front: (2) USB 2.0, (2) USB 3.0, headphone, microphone
Rear: (4) USB 2.0, DVI-I, DVI-D, VGA, PS/2 keyboard and 
mouse, audio in, microphone, 5.1/7.1 channel audio out, 
SPDIF Digital out, RJ-45, surround side/rear/center

Preinstalled Operating 
Systems

Windows® 8

Windows 7

FreeDos

System Unit

1

Access panel

657104-001

2

Front bezel

657112-001

3

Power supply, 300W

656721-001

System boards with thermal grease, alcohol pad, and CPU socket cover

4

System board for use in 7300 models

656599-001

*

System board for use in 7500 models

687940-001

*

System board for use in 7500 models with Windows 8 with no Digital 
Product Key (DPK)

696887-001

*

System board for use in 7500 models with Windows 8 Standard

696887-501

*

System board for use in 7500 models with Windows 8 Professional

696887-601

* Not shown

Cables

1

Power switch/LED assembly

657105-001

2

SATA cable, 165 mm

657102-001

*

Adapter, DVI to VGA, HF

657401-001

*

Adapter, DVI to VGA, 29-pin, HF

657851-001

*

Antenna, for use with 2x2 WLAN modules

593890-001

*

Antenna, for use with 1x1 WLAN modules

701397-001

*Not shown

Miscellaneous Parts

1

Chassis fan

657103-001

2

Fan sink

657402-001

3

Front USB and I/O assembly

657113-001

*

Card reader, bezel blank

657853-001

*

Card reader, bezel

657854-001

*

RTC battery

319603-001

*

Rubber feet

530593-001

*Not shown

Mass Storage Devices (not illustrated)

16X SATA DVD±RW drive with

581600-001

Blu-ray BD-RW SuperMulti DL Drive 

617030-001

Bezel, optical drive

657852-001

3 TB, 7200 rpm SATA hard drive

696961-001

3 TB, 5400 rpm SATA hard drive

668149-001

2 TB, 7200 rpm SATA hard drive

616608-001

2 TB, 5400 rpm SATA hard drive

613210-001

1.5 TB, 7200 rpm SATA hard drive, 6G

613209-001

1.5 TB, 5400 rpm SATA hard drive, 3G

652272-001

1 TB, 7200 rpm SATA hard drive

621418-001

750 GB, 7200 rpm SATA hard drive, 3G

632938-001

500 GB, 7200 rpm SATA hard drive, 3G

621421-001

320 GB, 7200 rpm SATA hard drive, 6G

621420-001

256 GB Solid-state drive (SSD)

661842-001

128 GB Solid-state drive (SSD)

665961-001

120 GB Solid-state drive (SSD)

661841-001

Summary of Contents for Elite 7300 Microtower

Page 1: ...ket cover 4 System board for use in 7300 models 656599 001 System board for use in 7500 models 687940 001 System board for use in 7500 models with Windows 8 with no Digital Product Key DPK 696887 001 System board for use in 7500 models with Windows 8 Standard 696887 501 System board for use in 7500 models with Windows 8 Professional 696887 601 Not shown Cables 1 Power switch LED assembly 657105 00...

Page 2: ...s to system configuration or default settings and exits Computer Setup Storage Device Configuration Lists all installed BIOS controlled storage devices The following options are available CD ROM Hard Disk Default Values Translation Mode SSD Life Used SMART ATA disks only Diskette SATA Defaults Storage Options Allows you to set eSATA Port Set SATA port as eSATA port for use with external drive SATA...

Page 3: ...oper module type 3 Remove and replace faulty module s 4 If error persists after replacing modules replace system board 214 DIMM Config uration Warning Populated DIMM configura tion is not optimized Rearrange DIMMs so that each channel has the same amount of memory 219 ECC Memory Module Detected ECC Modules not supported on this Platform Recently added memory module s support ECC memory error corre...

Page 4: ...TA0 1st hard drive LAN USB LAN USB connector SATA1 2nd hard drive USB USB connectors SATA3 2nd optical drive SPDIF_OUT21 External SPDIF connector System Board Connectors and Jumpers component location may vary SPDIF_OUT1 Internal SPDIF connector SATA2 1st optical drive PUMP_FAN CPU cooler connector SATA3 2nd optical drive ATX_CPU CPU power connector F_USB1 1st USB connector CPU_FAN1 Heat sink fan ...

Reviews: