background image

© Copyright 2020 HP Development Company, 
L.P.

Bluetooth is a trademark owned by its 
proprietor and used by HP Inc. under license. 
Chrome, Chrome OS, Chromebook, Chromecast, 
Google, and Google Drive are trademarks of 
Google LLC. Intel, Core, vPro, and XMM are 
trademarks of Intel Corporation or its 
subsidiaries in the U.S. and/or other countries. 
SDHC, SDXC, and microSD are trademarks or 
registered trademarks of SD-3C LLC. Windows 
is either a registered trademark or trademark 
of Microsoft Corporation in the United States 
and/or other countries. USB Type-C® is a 
registered trademark of USB Implementers 
Forum.

The information contained herein is subject to 
change without notice. The only warranties for 
HP products and services are set forth in the 
express warranty statements accompanying 
such products and services. Nothing herein 
should be construed as constituting an 
additional warranty. HP shall not be liable for 
technical or editorial errors or omissions 
contained herein.

First Edition: August 2020

Document Part Number: M16432-001

Product notice

This guide describes features that are common 
to most models. Some features may not be 
available on your computer.

To access the latest user guides, go to 

http://www.hp.com/support

, and follow the 

instructions to find your product. Then select 
Manuals.

Software terms

By installing, copying, downloading, or 
otherwise using any software product 
preinstalled on this computer, you agree to be 
bound by the terms of the HP End User License 
Agreement (EULA). If you do not accept these 
license terms, your sole remedy is to return the 
entire unused product (hardware and software) 
within 14 days for a full refund subject to the 
refund policy of your seller.

For any further information or to request a full 
refund of the price of the computer, please 
contact your seller.

Summary of Contents for Elite C1030 Chromebook


































































Reviews: