●
The BIOS measurement has changed.
For more information about Intel TXT, go to
.
You must use a service event to resolve this issue.
NOTE:
The computer attempts to notify you of this problem through a series of blinking lights. When you
attempt to turn on the computer from an Off or Hibernated state, lights associated with the
caps lock
and
num lock
keys both blink six times, followed by a pause, and then continue in a repeating pattern.
Sure Start unable to find valid BIOS Boot Block image
This computer has experienced a problem in locating a valid BIOS image, resulting in a failed startup. You must
use a service event to identify the source of the error and take appropriate corrective action.
NOTE:
The computer attempts to notify you of this problem through a series of blinking lights. When you
attempt to turn on the computer from an Off or Hibernated state, lights associated with the
caps lock
and
num lock
keys both blink seven times, followed by a pause, and then continue in a repeating pattern.
Sure Start has identified a problem (Manual Recovery Policy Set)
This computer has experienced a problem in locating a valid BIOS image, resulting in a failed startup. HP Sure
Start normally repairs this type of issue; however, on this computer HP Sure Start has been configured to
operate in manual mode key sequence.
To proceed with the repair, press and hold the following keys:
esc + up arrow + down arrow
. To avoid the need
for this manual recovery step, set the HP Sure Start recovery policy to automatic. If this error reoccurs, you
must use a service event to identify the source of the error and take appropriate corrective action.
NOTE:
The computer attempts to notify you of this problem through a series of blinking lights. When you
attempt to turn on the computer from an Off or Hibernated state, lights associated with the
caps lock
and
num lk
keys both blink eight times, followed by a pause, and then continue in a repeating pattern.
POST error messages and user actions
Use this information to determine the meaning of POST error messages.
Table 7-55
POST error messages and user actions to address the error
Test description
Failure descriptions
Error code
Possible user actions
Product
information
Invalid value
00A
Contact support for assistance.
Startup test
Memory module
200
Attempt to reseat the memory module and then repeat the test.
Search
for details about troubleshooting
issues related to the memory module.
If the memory module still fails, contact support.
Startup test
Hard Disk 1 SMART
301
Attempt to reseat the hard drive and repeat the test.
The hard disk drive might have failed. Contact support for assistance.
Startup test
Hard Disk 2 SMART
302
The hard drive might have failed. Contact support for assistance.
Startup test
Hard Disk 1 Quick
303
The hard drive might have failed. Contact support for assistance.
Sure Start unable to find valid BIOS Boot Block image
127
