Table 6-8
Camera module descriptions and part numbers
Description
Spare part number
IR camera (2 MP)
L67412-001
HD camera (8 MP)
M75415-001
Microphone cable
L67421-001
IR LED cable
M75416-001
IMPORTANT:
Use care to prevent damaging the zero-insertion force (ZIF) connector and ribbon cable.
Before removing the display panel, follow these steps:
▲
Prepare the computer for disassembly (see
Preparation for disassembly on page 40
Remove the camera module:
1.
Disconnect the four cables from the ZIF connectors on the camera module (1).
2.
Using a Phillips #0 screwdriver, remove the two Phillips M1.4 × 2.5 screws (2) that secure the module to
the computer, and then remove the module from the computer (3).
3.
If you need to remove the IR LED cable from the camera module, pull the cable straight up and off the
camera module (1).
54
Chapter 6 Removal and replacement procedures for authorized service provider parts
