background image

NOTE:

To stop a diagnostic test, select Cancel.

Accessing HP PC Hardware Diagnostics Windows from HP Support Assistant

After HP PC Hardware Diagnostics Windows is installed, follow these steps to access it from HP Support 

Assistant.

1.

Select the Search icon (select products only) from the taskbar, type 

support

, and then select HP 

Support Assistant.

– or –
Select the question mark icon (select products only) in the taskbar.

2.

Select Troubleshooting and fixes (select products only) or Fixes & Diagnostics.

3.

Select Diagnostics, and then select HP PC Hardware Diagnostics Windows.

4.

When the tool opens, select the type of diagnostic test that you want to run, and then follow the 

on-screen instructions.

NOTE:

To stop a diagnostic test, select Cancel.

Accessing HP PC Hardware Diagnostics Windows from the Start menu (select products only)

After HP PC Hardware Diagnostics Windows is installed, follow these steps to access it from the Start menu.

1.

Select the Start button, and then select All apps (select products only).

2.

Select HP PC Hardware Diagnostics Windows.

3.

When the tool opens, select the type of diagnostic test that you want to run, and then follow the 

on-screen instructions.

NOTE:

To stop a diagnostic test, select Cancel.

Downloading HP PC Hardware Diagnostics Windows

The HP PC Hardware Diagnostics Windows downloading instructions are provided in English only. You must 

use a Windows computer to download this tool because only .exe files are provided.

Downloading the latest HP PC Hardware Diagnostics Windows version from HP

To download HP PC Hardware Diagnostics Windows from HP, follow these steps.

1.

Go t

http://www.hp.com/go/techcenter/pcdiags

. The HP PC Diagnostics home page is displayed.

2.

Select Download HP Diagnostics Windows, and then select the specific Windows diagnostics version to 

download to your computer or a USB flash drive.

The tool downloads to the selected location.

Downloading the HP PC Hardware Diagnostics Windows from the Microsoft Store

You can download the HP PC Hardware Diagnostics Windows from the Microsoft Store.

Accessing HP PC Hardware Diagnostics Windows from HP Support Assistant

75

Summary of Contents for EliteBook 630








































































































Reviews: