background image

Using Remote HP PC Hardware Diagnostics UEFI settings (select 

products only)

Remote HP PC Hardware Diagnostics UEFI is a firmware (BIOS) feature that downloads HP PC Hardware 
Diagnostics UEFI to your computer. It can then execute the diagnostics on your computer, and it might upload 
results to a preconfigured server.

For more information about Remote HP PC Hardware Diagnostics UEFI, go t

http://www.hp.com/go/

techcenter/pcdiags

, and then select Find out more.

Downloading Remote HP PC Hardware Diagnostics UEFI

HP Remote PC Hardware Diagnostics UEFI is also available as a SoftPaq that you can download to a server.

Downloading the latest Remote HP PC Hardware Diagnostics UEFI version

You can download the latest HP PC Hardware Diagnostics UEFI version to a USB flash drive.

1.

Go to 

http://www.hp.com/go/techcenter/pcdiags

. The HP PC Diagnostics home page is displayed.

2.

Select Download Remote Diagnostics, and then select Run.

Downloading Remote HP PC Hardware Diagnostics UEFI by product name or number

You can download HP Remote PC Hardware Diagnostics UEFI by product name or number.

NOTE:

For some products, you might have to download the software by using the product name or number.

1.

Go to 

http://www.hp.com/support

.

2.

Select Software and Drivers, select your type of product, enter the product name or number in the 
search box that is displayed, select your computer, and then select your operating system.

3.

In the Diagnostics section, follow the on-screen instructions to select and download the Remote UEFI 
version for the product.

Customizing Remote HP PC Hardware Diagnostics UEFI settings

Using the Remote HP PC Hardware Diagnostics setting in Computer Setup (BIOS), you can perform several 
customizations.

Set a schedule for running diagnostics unattended. You can also start diagnostics immediately in 
interactive mode by selecting Execute Remote HP PC Hardware Diagnostics.

Set the location for downloading the diagnostic tools. This feature provides access to the tools from the 
HP website or from a server that has been preconfigured for use. Your computer does not require the 
traditional local storage (such as a hard drive or USB flash drive) to run remote diagnostics.

Set a location for storing the test results. You can also set the user name and password that you use for 
uploads.

Display status information about the diagnostics run previously.

To customize Remote HP PC Hardware Diagnostics UEFI settings, follow these steps:

1.

Turn on or restart the computer, and when the HP logo appears, press 

f10

 to enter Computer Setup.

2.

Select Advanced, and then select Settings.

86

Chapter 9   Using HP PC Hardware Diagnostics

Summary of Contents for EliteBook 840 G8

















































































































Reviews: