NFC module
Description
Spare part number
NFC (Near Field Communication) module
L17976-001
Before removing the NFC module, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
).
5.
Remove the battery (see
6.
Remove the following components:
a.
Keyboard (see
)
b.
Hard drive (see
)
c.
Internal base plate (see
Internal base plate on page 48
Remove the NFC module:
1.
Disconnect the system board cable (1) and the NFC antenna (2) from the NFC module ZIF connectors.
2.
Pry the NFC module from the smart card reader, and the lift it from the computer (3).
NOTE:
The NFC antenna is spared with the TouchPad.
Reverse the removal procedures to install the NFC module.
Component replacement procedures
57