Speaker assembly
Description
Spare part number
Speaker assembly (includes cable)
821170-001
Before removing the speaker assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
).
6.
Remove the keyboard (see
).
7.
Remove the heat sink/fan assembly (see
Heat sink/fan assembly on page 50
).
8.
Remove the system board (see
).
Remove the speaker assembly:
1.
Remove the wireless antennas from the clip in the speaker (1).
2.
Remove the two Phillips M2.5x2.5 screws that secure the speakers to the computer (2).
3.
Remove the speaker (3) from the computer.
Reverse this procedure to install the speaker assembly.
64
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts