Hard drive
NOTE:
All hard drive spare part kits include a hard drive bracket and screws.
Description
Spare part number
750-GB, 7200-rpm hard drive
633252-001
640-GB, 5400-rpm hard drive
637312-001
500-GB, 7200-rpm hard drive
634919-001
500-GB, 7200-rpm hard drive (for use in the upgrade bay)
656424-001
500-GB, 5400-rpm hard drive
634932-001
320-GB, 7200-rpm, Self-Encrypting Drive (SED) hard drive
626978-001
320-GB, 7200-rpm hard drive
627731-001
320-GB, 5400-rpm hard drive
622643-001
250-GB, 7200-rpm hard drive
635225-001
256-GB solid-state drive
669684-001
256-GB solid-state drive, Self-Encrypting Drive (SED)
684565-001
256-GB solid-state drive, SATA III
681123-001
160-GB solid-state drive
643916-001
128-GB solid-state drive
643917-001
128-GB solid-state drive, SATA III
681122-001
120-GB solid-state drive
669685-001
Upgrade Bay - Hard Drive Adapter Kit
643921-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 63
).
5.
Remove the bottom door (see
Bottom door on page 70
).
Remove the hard drive:
1.
Position the computer upside-down, with the battery bay toward you.
2.
If necessary, lift the smart card reader out of the way.
3.
Loosen the three captive Phillips screws
(1)
that secure the hard drive to the computer.
76
Chapter 4 Removal and replacement procedures
