This HP product is designed to comply with the Waste Electrical and Electronic
Equipment (WEEE) Directive - 2002/96/EC.
This product is in compliance with California Proposition 65 (State of
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT) standard at the Gold
level, see
www.epeat.net
Plastics parts weighing over 25 grams used in the product are marked per ISO
11469 and ISO1043.
This product contains 0% post consumer recycled plastic (by wt.)
This product is greater than 96.7% recycle-able when properly disposed of at
end of life
Packaging Materials
External:
PAPER/Corrugated 335.7 g
Internal:
PLASTIC/Polyethylene low density 13.8 g
PLASTIC/EPE-Expanded Polyethylene 68.1 g
PLASTIC/Polyester 6.5 g
The PAPER/Corrugated packaging material is made from 80% recycled
content.
The PLASTIC/Polyethylene high density packaging material is made
from 60% recycled content.
The PLASTIC/EPE-Expanded Polyethylene packaging material is made
from 60% recycled content.
The PLASTIC/Polyester packaging material is made from 60% recycled
content.
HP follows these guidelines to decrease the environmental impact of product
packaging:
Eliminate the use of heavy metals such as lead, chromium, mercury and
cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation fuel
efficiency.
Plastic packaging materials are marked according to ISO 11469 and DIN
6120 standards.
QuickSpecs
HP EliteBook 8470w Mobile Workstation
Technical Specifications
DA - 14305 Worldwide — Version 13 — May 8, 2013
Page 38
