a.
Release the bezel by flexing and lifting the bottom (1), left and right sides (2), and top (3).
b.
Remove the bezel from the display (4).
Bezels are available as the following spare part numbers:
●
M05256-001: IR camera and ambient light sensor
●
M05257-001: IR camera
●
M05258-001: RGB camera and ambient light sensor
●
M05259-001: RGB camera
●
M05260-001: Microphone module only (no camera module)
9.
If you need to remove the hinge cover from the display enclosure:
a.
Remove the Phillips M1.6 × 3.0 screw (1) that secures the hinge cover to the display.
b.
Slide the hinge cover toward the right (2).
c.
Rotate the bottom of the hinge cover up, and then remove it from the display (3).
The hinge cover is available in the Hinge Kit as spare part number M05265-001.
Component replacement procedures
59
