Top cover
Description
Spare part number
Top cover with TouchPad (includes battery release latch, NFC board antenna cable, power
connector cover, and RJ-45 jack cover)
753715-001
Before removing the Top cover, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 28
).
5.
Remove the service door (see
Service door on page 30
).
6.
Remove the keyboard (see
Keyboard on page 41
).
Remove the Top cover:
1.
Remove the two Phillips M2.0×4.3 screws that secure the Top cover to the computer.
2.
Close the computer.
3.
Turn the computer upside down, with the rear toward you.
4.
Disconnect the microphone cable
(1)
from the system board.
Component replacement procedures
45
Summary of Contents for EliteBook Revolve 810 G2 Tablet
