3
Setting Up and Using the Monitor
Attaching the Protective Cover and Setting Up the Monitor
Attaching the Protective Cover
1.
Lay the monitor face up on a flat surface.
2.
On the protective cover, locate the flap with a ridge on one side. Hold the cover with the ridge
facing up and the flap over the HP logo on the monitor bezel.
The top of the protective cover is now lined up with the top of the monitor.
3.
Lower the protective cover onto the monitor.
As the protective cover contacts the monitor, magnets in the bottom edge of the cover align and
attach to the monitor.
4
Chapter 3 Setting Up and Using the Monitor