8
hp digital media receiver
connecting power
Turn your television on. If you hooked up the audio to
your stereo system, turn your stereo system on as well.
Tune them both to the proper mode to match the audio
and video connectors attached to the receiver.
Insert the small end of the power adapter cable into the
power connection on the back of the media receiver.
Make sure it is connected firmly.
Plug the power adapter into a working electrical outlet.
setup wizard
When power is applied for the first time, the setup
wizard will appear.
Use the remote control to set up your hp digital media
receiver. The setup wizard allows you to assign a
name and quickly configure your network settings.
Once you have successfully completed the wizard,
your media receiver will be ready to use!
Note:
You can run the setup wizard again if you wish
to change any of your settings. On the main screen,
press the
options
button, highlight
Run Setup
Wizard
, and press
select
.
Lexus.book Page 8 Monday, January 6, 2003 2:00 AM